Click the image to see a larger version, just click the buy button to put the item in a shopping cart.

The Paypal cart will open in a new window, you can position it next to this page and watch your order build in the other.

USA riders can take advantage of the Paypal 6 months no interest offer.

Item Price Ship Buy
Foreign shipment additional postage surcharge $25
This charge compensates for the usual additional shipping required for orders shipped out of the USA.
NOTE - You only need to add 1 of these surcharges per order but the item is shown on every ordering page.
2V Desmo Repair and Maintenance Guide $38 $10
This is a comprehensive guide to maintaining a 2V Ducati motor. Covers all the bikes that came with the 904 motor.
Using this guide you will know more about your bike than most mechanics. A huge time/cost saver.

Now back in stock.
Keihn 39 mm FCR Kit, Custom DDL kit for the Elefants - to be shipped *to* the USA $1382 $50
Complete, ready to bolt on kit of 39 mm FCRs with new throttle and throttle cables,
use your existing air filter or get a K&N,
carb adapters and custom hand-made throttle linkage so they fit and clear the Elefant frame.

Available Again - but at higher price.
Excellent install documentation included plus there is a step by step photo install guide on our site.

USA shipping is $50 which is the cost for the Priority Mail postage and the insurance for loss or damage.
DDL only charges the actual amount of the shipping.

Keihn 39 mm FCR Kit, Custom DDL kit for the Elefants - to be shipped *outside* the USA $1382 $90
Complete, ready to bolt on kit of 39 mm FCRs with new throttle and throttle cables,
use your existing air filter or get a K&N,
carb adapters and custom hand-made throttle linkage so they fit and clear the Elefant frame.

Available Again - but at higher price.
Excellent install documentation included plus there is a step by step photo install guide on our site.

Out of USA shipping $90 which is the cost for the Priority Mail postage and the insuranc for loss or damage. DDL only charges the actual amount of the shipping.

UniFilter - Custom 3 - stage oiled foam filter - 900IE-E750-E900 $xx $6
Custom made to DDL specs, ready to drop in the airbox. Better flow than the OEM paper filter, better filtration than the K&N oiled gauze
Pre-oiled, just drop it in. Will last the life of your bike - the UNI is the best filter to use.
Carbmate Carburetor Balancer $135 $8
With this amazing gauge you can balance your carbs in 5 minutes.
Uses a new meter paradigm (make the needle hit zero) to allow you to focus on the job and get it done right. Very easy to use, no need to pay a shop to balance your carbs.

New design, uses LEDs instead of an analog meter, uses your bikes battery for power (no problem with a dead battery in the unit)
DDL Performance Reusable Stainless Steel mesh oil filter

for all Ducati motors

$149 $10
State of the art oil filtration.
Click to read of all the benefits to this oil filter design including added usable horsepower that is not wasted in pushing oil though a restrictive paper element.
Remus Titanium Slip-On Exhaust Kit for Ducati E900
Cagiva E900AC E750AC 900IE

Click logo at left to see full kit.

$599 $25
Remus are the only maker to have offered a tuned *purpose built* exhaust for the 750 and 900 motors as they were used in the Elefant series.

Due to the age of the bike and small market, Remus and most other makers, no longer supply a purpose built kit for the bike.

DDL has commissioned a replacement hybrid adapter to mate a Remus Gran Prix canister to the header of the bike.
This kit allows for the mounting of a 54 mm inlet canister and uses a spring retainer and steel bracket stabilizer system.
This systems uses the industry standard "stepped outlet" system to create a tuned system to maximize flow (essentially it creates a long, slowly enlarging, megaphone).

Systems that just dump into a canister do not follow this well documented approach.

Supplied with a custom built hybrid connector to mate with the exhaust header. These may be the last units that might be available for some time. I run this canister on my bike.
NOTE - custom built brass ferule shown in photo is optional.
The stock system has a ferule of that size and you need it to allow for fine tuning the install and to take up the space betwwen the header and the exhaust system inlet.
If you do not have the OEM ferule the brass replacement is $35 and can be ordered below.

Custom Brass Ferule for Remus Exhaust Kit $35 $0
This custom fabricated step up ferule helps create the tuned exhaust system.
To fab this simple ferule requires us to buy 2 different diameter/thickness brass tubes,
accurately cut them at 6 mm width,
freeze the inner and heat the outer to create enough clearance for them to be press fit together.
There is no commercially available ferule of this size.
MPB Collets $119 $6
The MBP collets are back and at a lower price too. These often extend your valve reshimming interval out past 18,000 miles.
When used with the EMSDUC shim kit the installation goes fast and smooth.
EMSDuc 2V shim kit $299 $12
The factory Ducati shim kit is $1200+. And all you need are the main shims in the middle of the size range. This kit includes 15 closers and 21 openers
in a nice case. Much higher quality shims than from the factory. Use with the MBP to end your valve worries. Each shim is 100% quality controlled.
Shim Kit/MPB Collets/Gaskets Bundle $465 $0
Shim Kit/MPB Collets/Valve Cover Gaskets Bundle, everything you need to push your valve setting issues out 18,000+ miles
3 essential products as a bundle, get the gaskets for free and free USA shipping.
Digital Vernier Caliper - Excellent Quality! $36 $8
There are many cheap calipers available these days, this is a very high quality unit even though it is very affordably priced.
To take care of your bike you need to be able to measure shims, bearings, all kinds of precision parts. You need this tool.
ExactFit timing belts for 900 (pair) $84 $6
OEM Ducati belts are about $130 USD these days.
These are an excellent alternative, I use them myself.
ExactFit timing belts for 750 (pair) $84 $6
OEM Ducati belts are about $130 USD these days.
60+ piece Stainless Body Fastener Kit $55 $9
Comprised of specialized fasteners for virtually all of the nuts/screws/bolts on the Elefant.
Kit covers all body panels/tank/switchgear/chassis and includes 18 rubber wellnuts for the fairing.

Kit comes with placement/location guide.
50+ piece Stainless Fastener Motor Kit $40 $6
This is a kit to replace virtually all of the exterior OEM fasteners on your 900 motor with high quality stainless steel.
Kit comes with placement/location guide.
110+ piece Stainless Fasteners Kits $90 $10
Get both kits at the same time, save some money
Come with usage guides and includes 18 of the rubber wellnuts for the fairing
18 rubber/brass wellnuts $25 $0
These are the very hard to find wellnuts that hold the fairing together.
Kit is 18 wellnuts, no screws. - can only be ordered with minimum order - not separately